Please enable JavaScript!
Bitte aktiviere JavaScript!
S'il vous plaît activer JavaScript!
Por favor,activa el JavaScript!

    FORD CROWN VICTORIA - REMOTE KEYLESS ENTRY PROGRAMMING INSTRUCTION

REMOTE CONTROL TRANSMITTER PROGRAMMING GUIDE FOR FORD CROWN VICTORIA.

NO TOOLS REQUIRED.

1. Using the car key switch the “Ignition On” and switch the “Ignition Off” eight ( 8 ) times within 10 seconds.
    You must end this procedure with key in “Ignition On” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the LOCK buton on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote. 
    Door locks will cycle again to confirm programming

4. TURN the ignition to OFF and pull out the key from ignition switch to exit programming mode.
    Locks will cycle to indicate end of programming mode.

* Depending on the model year, activation “remote learning mode”, described in first point, can differ 
  in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ). 
  Activation “remote learning mode” in vehicle will be indicated by central locking - the locks will lock 
  and unlock fast about 3 times ).



REMOTE TRANSMITTER FOR FORD CROWN VICTORIA PART NUMBER :
3W7Z-15K601-AA 3W7Z15K601AA 1788A-FWB 3W73-15K601-AA 3W7315K601AA 
F8AB-15K601-AA CWTWB1U343 CWTWBIU343 CWTWB1U313 CWTWBIU313