TRANSPONDERY.COM
☛ You must close all doors, liftgate/trunk and windows in order for this programming procedure to work.
☛ This procedure is for the remote keyless entry only and has nothing to do with the ability to start the engine.
1. Insert the key into Driver Door Lock.
2. Using the key, turn the Driver Door Lock from Neutral to Open position 3 times and keep the key in the Open position about 5 second.
3. Remove the key from Driver Door Lock.
When done properly, the driver door LED should illuminate. For next steps you have 20 seconds:
4. Press and hold the Lock Button at your Remote Control Transmitter.
5. Still pressing the Lock Button - press the Unlock Button 3 times.
6. Release the Lock Button.
The driver door LED should flash to indicate successful programming.
Repeat procedurę from step 4 for learning additional remotes (up to a maximum of four).
Wait 15 seconds before trying remotes.
